PYLE Audio PLRD102 - Manual (Page 4)

3
3.INSTALLATION
Use the 6 pieces of machine screws(4x20BA) , and fix the setting plate to
the place, then assembly the unit of monitor to the setting plate.
12
Fault reason resolvent
No power
red wire goes to 12v +;
black one goes to ground connect power
correctly
Fuse Blowout change fuse
Power line unconnected
connect correctly
to the power
No picture
no VD input input video
No dvd signals output reset dvd
Video lines unconnected connect video line again
Remote
useless
battery protection
paper unload
take out the paper
Aim at wrong direction
aim at the receiver
window
No power change battery
Distortion
Can not play bad disc change better disc
disc load in mistake way re-put disc
Disc dirty clean disc
Fast forward/ backward Normally
BASIC TROUBLE SHOOTING Installation