PRESTIGIO P460MW - Manual (Page 11)

11 PRESTIGIO P400MW / P460MW
ENG
7 Connecting PC (DTV)
Connect the signal cable from the monitor
output socket of the PERSONAL COMPUTER
to the RGB INPUT sock-et of the set.
Connect the audio cable from the PC to the
AUDIO INPUT sockets of the set.
Press the INPUT SELECT button to select PC-
RGB.
Switch on the PC, and the PC screen ap-
pears on the set.
The set can be operated as the PC monitor.
RGB-DTV input signal : 480p-60Hz, 576p-
50Hz, 720p-50Hz, 720p-60Hz, 1080i-50Hz, 1080i-60Hz, 1080p-50Hz, 1080p-60Hz.
8 Connecting Digital Audio
-Send the set’s audio to external audio equipment
(stereo system) via the Digital Audio Output (Opti-
cal)
Caution : Do not look into the optical output port.
Looking at the laser beam may damage your vision.
How to connect
Connect one end of an optical cable to the TV Digi-
tal Audio (Optical) Output port.
Connect the other end of the optical cable to the
digital audio (optical) input on the audio equip-
ment.
Note : Digital Audio Output works, when it’s inputted HDMI signal to the set.