Panasonic EB-GD55 EN - Manual (Page 24)

24
Enter a value (number of units) which is to be the maximum permitted,
and the corresponding cost will be displayed.
Note: The duration of one unit may vary during the day, peak and off-peak
times. Therefore, the call charge can be calculated accordingly. However,
call charge information may not give an accurate reflection of the tariffs
charged by your Service Provider.
Diverting Calls
Voice call can be diverted in different circumstances and to different numbers.
For example you may wish voice calls to be diverted to voicemail box in the
event that the phone is switched off.
Idle > Menu > Phone Menu > Call Divert
Use to select the circumstances that you wish to activate call diverts.
Then enter phone number to divert to.
When a divert situation is enabled the divert icon ( ) is displayed.
When updating or checking the status of
Call Divert the phone must be
registered with a network.
Restricting Calls
Call Barring
The “Call Bar” function is used to restrict certain outgoing and/or incoming
calls. “Call Bar” is controlled by a security password that is supplied by the
Service Provider. When updating or checking the status of Call Bar the
phone must be registered with a network. Different Call Bar restrictions can
be used for voice call. Any combination of call restrictions can be set.
Idle > Menu > Phone Menu > Security > Call Bar
Use to select the circumstances you need, then enter call bar password
Network
Network setting enables you to change the network parameters.
Auto Network
You can set “Auto Network”
On or Off.
New Network
Once you set the “Auto Network”
On: the phone will automatically search for
an available network. If you set it
Off, you can select a network manually.
Network List
You can create and edit a network list according to your preferences.
Band Select
You can choose a network band: 900/1800, 900/1900, 900, 1800, 1900MHz.