PoGo Products EVR-100 - Manual (Page 43)

1. Check the battery and recharge if necessary.
2. Make sure the battery is properly inserted to match the (+),(-) polarities.
3. Make sure the battery cover is properly shut. Remove the battery and wait
awhile before replacing.
1. Check the status of the HOLD switch.
2. Make sure the internal memory isn t full.
3. Check the battery and recharge if necessary.
1. Check the status fo the HOLD switch.
2. Verify weather or not a recorded sound and/or message as already in
the player.
3. Check the battery and recharge if necessary.
1. Check volume level.
2. Make sure the earphone is properly plugged into the player.
Note : When the eatphone is connected to the player, no sound is
heard from the speaker.
3. Check if SPEAKER OFF is set on the MENU. Refer to P26.
1. Check volume level.
2. Make sure the eatphone is properly plugged into the player.
No display on LCD/
The player does not
function.
Recording function
isn t operable.
Playback function isn t
operable.
No sound is heard
from speaker.
No sound is heard
from earphone.
If you experience diffficulty operating the RipFlash Trio, refer to the problem-solving directions below
before calling customer service.
43