Troubleshooting and error messages – Panasonic KX-TDA100 User Manual

Page 36

Advertising
background image

Troubleshooting and Error Messages

36

Even when in standby mode, you
cannot access the Phonebook or

other menus.

(

is displayed in standby

mode.)

• The BGM setting may be on.

→ Press

then

, and press

.

Noise is frequently heard.

→ Set the handset and base unit away from other electrical

appliances.

→ Move closer to the base unit.

Two short beeps are heard
during a conversation.

• The radio signal is weak.

→ Move closer to the base unit.

The charge indicator flashes red
rapidly.

• The charger is not connected properly.

→ Make sure the battery is inserted properly.

→ Set the handset in the charger properly.

You charged the battery for 7
hours, but the beep tones sound

every 5 seconds and

(needs

to be charged) flashes after a few
telephone calls.

• The battery charge contacts may be dirty.

→ Clean the battery charge contacts without damaging them

and charge once more.

• It is time to change the battery.

→ Replace with a new one.

The battery indicator does not
display the remaining charge

properly after you replace the

battery.

→ Charge the battery for about 7 hours when the low battery

warning is displayed.

While operating the unit, the AC

adaptor feels warm. While
charging the battery, the handset

feels warm.

• These are normal conditions.

Problem

Description and Solution

0

5

1

7

Advertising