Proxima ASA PL-300E - Manual (Page 10)

2 ProjectionLink User & Installation Guide
The Projection Link System
ProjectionLink includes two components: a Transmitter
(PL-300T) and a Receiver (PL-300R). The Transmitter is con-
nected to your computer or other source and the Receiver is
connected to your projector.
This Installation Guide shows you how to configure Projec-
tionLink. This Installation Guide does not explain how to
install ceiling mount projectors or how to pull cable, etc. Use
the suggestions in this Installation Guide to help configure
your projector with the ProjectionLink system.
The ProjectionLink Transmitter (PL-300T) should be located
somewhere in your conference room or boardroom. The
Transmitter allows you to connect multiple input sources to
your projector via CAT-5 cabling. Typically, the Transmitter is
located under your conference table or inside a podium at the
front of a room. This is the connection point for your input
devices (computers, video, and audio devices) and your
installed projector.
Transmitter Transmitter Transmitter Transmitter
Receiver Receiver Receiver Receiver