Internet configuration, Device operating mode, Obtain wan configuration dynamically – Patton electronic SL4020 User Manual
Page 32: Specify fixed wan configuration, Figure 6
Settings
32
SmartLink 4020 User Manual
4 • Network—WAN
Internet Configuration
Figure 6. Internet Configuration section of the Settings window
Device Operating Mode
Choose Router or Bridged depending on your operation.
Obtain WAN configuration dynamically
Select this option if appropriate. If you choose Obtain WAN configuration dynamically, the information is
detected automatically through DHCP.
Specify fixed WAN configuration
Select this option if you will not be using DHCP. If you choose Specify fixed WAN configuration, you will have
to enter the following information:
•
IP address.
•
IP of the netmask.
•
IP of the gateway.
•
IP of the DNS Server, if applicable.
•
Host name (the name will identify the computer on the Internet, such as SL4020.patton.com).
•
Domain name (the name that will identify one or more IP addresses). For example, the patton.com domain
is used by Patton Electronics Company. That domain can include multiple hostnames (such as
SL4020.patton.com, ftp.patton.com, and so on) that point to individual computers on the Patton network.
In short, for the hostname URL http://www.patton.com, the domain name is patton.com.