Programmable features 61 – Panasonic KX-FC238HK User Manual

Page 63

Advertising
background image

9. Programmable Features

61

memory becomes full during enlarge, reduce
or collate copy.

Code #36: Receiving oversized documents

RCV REDUCTION

=92%

[±]

If the size of the document sent by the other
party is as large as, or larger than the recording
paper, the unit can reduce the document and
print it. Select the desired reduction rate.

Note:

L

The information of the sending party is
printed on the top of each page. Therefore,
even if the original document is the same size
as the recording paper, the document will be
divided into 2 sheets when printed at

100%”. Select “92%” to print on 1 sheet.

Code #39: Changing the display contrast

LCD CONTRAST

=NORMAL

[±]

NORMAL” (default): For normal contrast.

DARKER”: Used when the display contrast is too

light.

Code #41: Changing the fax activation code

FAX ACTIVATION

=ON

[±]

If you wish to use the extension telephone (page
45) to r
eceive faxes, activate this feature and
program the activation code.

1. Press {MENU}.

2. Press {#}, then {4}{1}.

3. Press {A} or {B} repeatedly to select

ON”.

4. Press {SET}.

5. Enter your code (2 to 4 digits) using the dial

keys {0}–{9}, {*} and {#}.

L

The default code is @@@

9”.

L

Do not enter “0000”.

6. Press {SET}.

7. Press {MENU}.

Code #42: Setting the message alert

MESSAGE ALERT

=OFF

[±]

To alert you when a new voice message is
recorded. The unit beeps slowly until you listen
to the recorded messages.

ON”: You will be alerted to new messages by a

beeping sound.

OFF” (default): Deactivates this feature.

Code #43: Setting the recording time alert

REC. TIME ALERT

=OFF

[±]

To alert you with beeps when there is less than
60 seconds of remaining recording time. The
slow beeps will continue until you erase the
recorded messages (page 54).

ON”: You will be alerted that you have reached

the recording time limit by a beeping sound.

OFF” (default): Deactivates this feature.

Code #44: Setting the memory reception alert

RECEIVE ALERT

=ON

[±]

To alert you with a beeping sound when a
received fax document is stored into memory
due to some existing problem.
The slow beeps will continue until you clear the
printing problem and make sure the unit is
supplied with enough paper to print the stored
document.

ON” (default): You will be alerted to a reception

problem by a beeping sound.

OFF”: Deactivates this feature.

Code #46: Setting friendly reception

FRIENDLY RCV

=ON

[±]

To receive a fax automatically when you answer
a call using the base unit and hear a fax calling
tone (slow beep).

ON” (default): You do not have to press

{

FAX/START} for fax reception.

OFF”: You have to press {FAX/START} for fax

reception.

Code #47: Setting the voice guidance

VOICE GUIDANCE

=ON

[±]

If you wish to hear voice guidance, activate this
feature.

Setting

Recording
paper size

Original
document
size

100%”

A4

Letter

92%”

(default)

A4

A4

86%”

A4

A4

72%”

A4

Legal

FC238HK-PFQX2217ZA_en.book Page 61 Wednesday, July 27, 2005 11:02 AM

Advertising