Pioneer XDV-P9II - Manual (Page 6)

5
Precaution
• A “CLASS 1 LASER PRODUCT” label is affixed to the bottom of the player.
• Keep this manual handy as a reference for operating procedures and precautions.
• Always keep the volume low enough for outside sounds to be audible.
• Protect the product from moisture.
• If the battery is disconnected, the preset memory will be erased and must be repro-
grammed.
In Case of Trouble
Should this product fail to operate properly, contact your dealer or nearest authorized Pioneer
Service Station.
Preventing the Battery from Becoming Exhausted
When using this product, be sure your car engine is running. If you use this product when
your engine is not running, the battery will become exhausted.
Changing the Mode Switch Setting
Use a pen tip or other pointed instrument to select the correct setting of the Mode switch on
the rear of this unit for the component you are using it with. After changing the setting, be
sure to press the RESET button. (See page 6.)
(1) When using this product with a Pioneer compo-
nent featuring an IP-BUS input
• Select the IP-BUS mode.
(2) When using this product with a Pioneer compo-
nent that does not feature an IP-BUS input, or
another company’s product
• Select the STAND ALONE mode.
CLASS 1
LASER PRODUCT
Before Using
IP-BUS
STAND
ALONE