Planar PR3010 User Manual
Page 6
—
—
U
U
s
s
e
e
r
r
’
’
s
s
G
G
u
u
i
i
d
d
e
e
—
—
Label
Description
10.
Audio-out Audio
loop-thru
11.
USB
Connect the USB
cable from a
computer
(supplied)
12.
RS-232
(For PR5020
only)
Installation control
13.
Power
Connect the
power cord
(supplied)
14.
Security
Lock
Secure to
permanent object
with a
Kensington® Lock
system
6
P
OWER ON
/
OFF AND
S
ET
L
ANGUAGE
1.
Connect the power cord to the
projector [A] .Connect the other
end to a wall outlet.
Switch [B] from on (O) to off (
)
2.
The POWER and READY LEDs
on the projector turn on.
Turn on the connected devices.
3.
Ensure the Power LED is on (not
flashing) and then press the
Power button [C] to turn on the
projector.
(If any LEDs are flashing, do not
press the Power button. See
“LED Error Messages” in the
CD-ROM user manual.)
The projector splash screen
displays and connected devices
are detected.
4.
Press the Menu button and then
press the cursor
button until
Tool is highlighted [D].
5.
Press the cursor
button until
Language is highlighted [D].
6.
Press the
until your
language is displayed.
7.
Press the Menu button twice to
close the OSD.
7
A
DJUST
P
ROJECTOR
L
EVEL
1.
To raise the level of the
projector, lift the projector [A]
and press the height-adjuster
button [B].
The height adjuster drops down
[C].
2.
To lower the level of the
projector, press the height-
adjuster button and push down
on the top of the projector.
3.
To adjust the angle of the picture
[D], turn the tilt adjuster right or
left until desired angle has been
achieved.
2
8
A
DJUST
I
MAGE AND
V
OLUME
1.
Use the Image-focus control to
sharpen the projected image (A).
2.
Use the Image-zoom control to
resize the projected image and
screen size (B).