Panasonic KX-FP155 - Manual (Page 50)

Incoming Messages
50
When the unit has recorded new voice messages:
—the MESSAGE light will flash,
—the call counter will show the total number of recorded messages, and
—slow beeps will sound if the message alert feature is activated (feature #42 on page 66).
Example:
02
STOP
PLAY MESSAGES
QUICK
ERASE
SET
SLOW
Display
MESSAGE
FLASH/LIGHT
Press .
● Only the new recorded messages will be
played.
● Adjust the speaker volume using or
.
● After playing back all of the new messages,
the MESSAGE light will stop flashing but will
remain lit up.
If you press
at this
time, all the recorded messages will be
played.
PLAY MESSAGES
PLAY MESSAGES
Listening to recorded messages !
Call counter
Repeating a message
Press while listening to the message.
● If you press within 5 seconds of the
beginning of the message, the previous message
will be played.
● To play back a specific message, press or
and search for the message you want to
listen to.
Skipping a message
Press to play the next message.
Stopping playback
Press .
● If you press within 1 minute,
the unit will resume playing the rest of the
messages.
Voice time/day stamp
During playback, a synthesized voice will
announce the time and day of the week that each
message was recorded.
STOP
Changing the playback speed
Press to play messages at one and a
half times the original speed.
Press
to play messages at half the
original speed.
● To return to the original speed, press or
again during quick or slow playback.
Erasing all of the recorded messages
Check that you have listened to all of the recorded
messages.
1. Press .
Display:
2. Press
.
3. Press .
● To erase a specific message, press
while listening to the message you want to erase.
SET
ERASE MESSAGES?
YES:SET/NO:STOP
SET
ALL MESSAGES
PRESS SET
ERASE
SLOW
SLOW
QUICK
PLAY MESSAGES
QUICK
ERASE