PreSonus FireBox - Manual (Page 8)

2 INSTALLATION AND SETUP
8
FIREBOX HARDWARE CONTROL PANEL (Windows XP)
Sample Rate: Drop down the menu to select the sample rate of the FIREBOX – 44.1,
48, 88.2, 96k. This must be set to the same sample rate in your recording software.
Clock Source: Drop down the menu to select the FIREBOX’s digital sync source.
INTERNAL
SPDIF – Must be selected to use the SPDIF input.
(Note that Control Panel settings will be saved upon power down.)
Latency: – Sets the amount of delay time of your FIREBOX (1.5ms – 24ms). Latency
is the time it takes for the computer to process audio. Lower latency settings demand
more CPU resources. In the case of inconsistent audio, (i.e. drop outs, pops and
clicks, digital distortion, etc) we recommend that you increase this setting.
Input Level Boost: clicking this button will boost the input level of each corresponding
analog input on the FIREBOX by +12dB. Use this feature for recording quiet
instruments or devices with low output.