Photogenic Professional Lighting PLR500DR - Manual (Page 23)

23
PowerLight
!
Infrared Studio-Control Accessories.
(For all Digital Remote “DR” models.)
PLCPTR-2 Computer Studio Control System for IBM compatibles.
•
On-screen display of up to 9 different PowerLight “DR” models.
•
Set and transmit commands to just one light or the entire studio.
• 360-degree command coverage for changing flash power, modeling
intensity, proportional modeling sets, modeling ON/OFF, test flash, auto-
bracketing and standby mode.
•
Unlimited pose/light setting files can be named and saved for future recall
when the same pose is repeated.
Includes: Proprietary software, RS232 connector, AC power adapter, and
infrared dome transmitter.
(Used with PLDIR-2 receivers sold separately)
PLIRC-1 Hand-Held infrared transmitter.
•
Set and transmit commands to just one light or the entire studio.
• Transmits commands for changing flash power, modeling intensity,
proportional-modeling sets, modeling ON/OFF, test flash and standby
mode.
(Used with PLDIR-2 receivers sold separately)
Includes: Hand-Held transmitter and 9 volt battery.
PLDIR-2 Infrared receiver.
•
Displays the flash power in watt seconds or the modeling in watts.
•
Receives the infrared signals from PLCPTR-2 and PLIRC-1 transmitters.
• Plugs into any Digital Remote “DR” model of PowerLights. (Used with
PLIRC-1 and PLCPTR-2 transmitters sold separately)
Includes: Receiver/display and flexible cable to attach to PowerLights.