Peavey Impulse 500 - Manual

Impulse ™
500 Sub
Add-On Weather-
Resistant Injection-
Molded Subwoofer
Speaker System
SPECIFICATIONS
Enclosure:
Peavey Impulse ª 500 Subwoofer
Frequency Response:
Filtered:
50 Hz to 150 Hz
Unfiltered:
50 Hz to 2.8 kHz
Low Frequency Limit (-3 dB point):
50 Hz
Useable Low Frequency Limit
(-10 dB point):
44 Hz
Power Handling:
Filtered:
300 W continuous (34.6 V RMS)
600 W program
1,200 W peak
Unfiltered:
350 W continuous (37.4 V RMS)
700 W program
1,400 W peak
Sound Pressure Level (1W @ 1m,
swept-sine input in anechoic
environment):
Filtered:
98 dB
Unfiltered:
101 dB (midrange level)
Maximum Sound Pressure Level:
Filtered:
119 dB continuous
Unfiltered:
122 dB continuous
Transducer Compliment:
Model 1554 15" Black Widow ¨ woofer
Box Tuning Frequency (Fbox):
44 Hz
Crossover Type:
Passive Internal Low Pass
Electroacoustic Crossover
Frequency (Filtered):
150 Hz
Crossover Slope:
12 dB/octave (2nd order) low pass
Impedance (Nominal):
4 ohms
Impedance (Minimum):
3.0 ohms
Input Connections:
Filtered:
1/4" phone jack and 4-pin Neutrik ¨
Speakon ¨ connector in parallel
Unfiltered:
1/4" phone jack
Enclosure Materials and Finish:
Injection-molded high-impact polypropy-
lene of a nominal thickness of 1/4" and
with textured finish
Mounting :
Stand mounting via molded-in mount,
flying via Versamount
ª 70 (top or bot-
tom of cabinet) and four rubber feet for
floor use
Dimensions (H x W x D):
28.562" tall x 21.312" wide
(11.5" wide in rear) x 17" deep.
[72.55 cm x 54.13 cm
(29.21 cm rear) x 43.18 cm]
Net Weight: 52 lbs.
Shipping Weight: 59 lbs. (EST.)
SPECS
P E A V E Y E L E C T R O N I C S