Pioneer A9 - Manual (Page 16)

Listening to your system 04
16
En
Making an audio recording
You can make an audio recording from any
audio source connected to the receiver.
1 Select the source you want to record.
Use the input select buttons ( INPUT
SELECTOR).
2 Prepare the source you want to record.
Tune to the radio station, load the CD, set up
the turntable, etc.
3 Prepare the recorder.
Insert a blank tape, MD, etc. into the recording
device and set the recording levels.
1
Refer to the instructions that came with the
recorder if you are unsure how to do this.
4 Start recording, then start playback of the
source component.
Note
1 The receiver's volume, balance and tone controls have no effect on the recorded signal.
A9_KU.book 16 ページ ２００６年１１月６日 月曜日 午後３時３４分