Profoto ComPact 300 - Manual (Page 9)

Brief Manual
.
Install the enclosed plug-in board in the panel to recive the correct
operating voltage.
.
Check that the unit is set to the correct mains voltage (the plug-in board
on the panel).
.
Check that the modelling lamp has the correct mains voltage.
.
Connect the supplied mains cable· Turn on the unit with the “on” switch (ON).
.
Switch on the modelling light (PROP, MAX, OFF).
.
Set the desired energy (ComPact 300 1/1 - 1/4 energy,
ComPact 600/1200 1/1 - 1/16 energy).
.
Test the operation with a manual flash (test button).
.
Connect the sync cable.
English –
ComPact
The Light Shaping Company 9 Profoto
ComPact_Manual_nihav:Pro-7_Manual.final (?)_ny 06-12-05 09.06 Sida 9