Planar XP17WSA User Manual
Page 30
This device is a Class II information device that may be used in residential area or
neighboring area and in compliance with the VCCI, the EMC standard in Japan.
The device might experience reception interference if it is used near locations with
broadcasting or TV signal receivers. Use this product correctly according to instructions.
This product complies with Class II VCCI specifications. We do not guarantee its performance
if it is used incorrectly. Beware of the following points in the use of this product:
．
Use the attached power cord.
．
Use the attached LCD cables.
．
Do not alter the interior or attached cables of this device.
The test results show that this device meets the limits set for Class B digital
machine provided in Part 15 of FCC rules. Those limits are set to protect
residential areas from the devices with harmful emission. This device will
produce, use and radiate radio frequency energy. In addition, failure to follow
the user’s manual to install or use this device might produce harmful
interference with radio communication. Notwithstanding the foregoing, it does
not guarantee that this type of harmful interference does not occur in some
special installation. The interference caused by this device to the reception of
radio or television signals may be verified by turning it on and off. If
interference does occur, we suggest the user to take one or more of the
following remedies to try solve the problem:
．
Change the antenna direction or relocate it.
．
Increase the distance between this device and the receiver.
．
Connect the device to a power outlet different from the one used by the
receiver.
．
Ask for the suggestion of radio/TV technician with dealer experience.
29