Safety information – Sony KLV-27HR3 User Manual

Page 3

Advertising
background image

4

Safety Information

Mains lead

Unplug the mains lead when

moving the TV. Do not move

the set with the mains lead

plugged in. It may damage the

mains lead and result in fire or

electric shock. If the set has been dropped or

damaged, have it checked immediately by qualified

service personal.

Medical institution

Do not place this TV set in a

place where medical

equipment is in use. It may

cause malfunction of medical

instruments.

Damage requiring service

If the surface of the display cracks, do not touch it until

you have unplugged the mains lead. Otherwise electric

shock may result.

Ventilation

Leave space around the TV set. Otherwise, adequate air-

circulation may be blocked causing overheating which

may cause fire or damage the TV set.

LCD screen

• Although the LCD screen is made with high-precision

technology and 99.99% or more of the pixels are

effective, black dots may appear or bright points of

light (red, blue or green) may appear constantly on the

LCD screen. This is a structural property of the LCD

panel and is not a malfunction.

• Do not expose the LCD screen surface to the sun.

Doing so may damage the screen surface.

• Do not push or scratch the front filter, or place objects

on top of the TV set .The image may be uneven or the

LCD panel may be damaged.

• If the TV set is used in a cold place, a smear may occur

in the picture or the picture may become dark. This

does not indicate a failure. These phenomena disappear

as the temperature rises.

• Ghosting may occur when still pictures are displayed

continuously. It may disappear after a few moments.

• The screen and cabinet get warm when the TV set is in

use. This is not a malfunction

Carrying
Before carrying the TV set, disconnect all the cables

from the TV set.

Fluorescent lamp
This TV set uses a special fluorescent lamp as its
light source. If the screen image becomes dark,
flickers or does not appear, the fluorescent lamp has
run down and should be replaced. For replacement,
consult qualified service personnel.

Adjusting the viewing angle of the TV set
When adjusting the angle, hold the stand with your
hand so that it does not come loose or fall off.

Be careful not to catch your fingers between the TV

set and the stand.

10 cm
Leave at least this

much space.

30 cm

10 cm

Never install the unit as follows:

Air circulation
is blocked

Wall

Safety Information

Advertising
This manual is related to the following products: