Panasonic WV-CW864 - Manual (Page 25)

26
■ Local/Remote Setting
(LOCAL/REMOTE)
• Move the cursor to LOCAL/REMOTE, and select LOCAL or
REMOTE by moving the joystick to the right or left.
The factory default setting is LOCAL.
Note: The REMOTE mode does not work when the WV-RM70,
WV-CU360, WV-CU161, WJ-FS616 or WV-CU550 series is
connected. Make sure that LOCAL mode is selected in this
case.
■ Special 1 Menu Setting (SPECIAL 1)
● Privacy Zone (PRIVACY ZONE)
Up to 8 unwanted zones can be masked on the monitor screen.
1. Move the cursor to PRIVACY ZONE and select ON (ENB) or OFF
(ENB) by moving the joystick to the right or left. Press the CAM
(SET) key to display the ZONE NUMBER setting menu.
The factory default setting is OFF (ENB).
ON (ENB): Preset privacy zones are veiled on the monitor screen.
OFF (ENB): The veiling function does not work.
Note: If ON(DIS) or OFF(DIS) appears for PRIVACY ZONE, the
steps from 2 onward are not applicable. Select OFF for PASS-
WORD LOCK to take the following steps.
2. Select a zone number by moving the joystick to the right or left,
and press the CAM (SET) key.
• A zone number followed by * (asterisk) indicates that the zone
has already been registered.
• When a zone number having no * is selected, the picture is
zoomed out fully.
• When a registered zone number is selected, the camera
moves to the preset position. Note that if you move PAN/TILT,
ZOOM/FOCUS or ZONE SCALE in that position, the regis-
tered zone number having “*” is cancelled.
• The zone frame appears in the center of the screen if 3 or
fewer mask areas exist in that picture and if the zone number
is not registered yet.
• The privacy zone may appear on the monitor screen depend-
ing on the direction of the camera.
• The privacy zone function will not work at start-up immediate-
ly after turning the power on.
** SPECIAL 1 **
PRIVACY ZONE OFF(ENB)
PROPO.P/T ON
AREA TITLE ON(USER)
PATROL STOP
ALARM IN/OUT
PASSWORD LOCK OFF
CLEANING OFF
EL-ZOOM ON
PRESET ALM OFF
IMAGE HOLD OFF
RET
Special 1 menu
** ZONE NUMBER 1*/8 **
RET
ZONE NUMBER setting menu
** SET UP MENU **
PRESET 1
MAP
HOME POSITION
SELF RETURN
AUTO MODE
AUTO PAN KEY
DIGITAL FLIP
LOCAL/REMOTE
SPECIAL1
CAMERA
RS485 SET UP
OFF
OFF
OFF
AUTO PAN
ON
LOCAL
Setup menu
** ZONE NUMBER 1*/8 **
PAN/TILT
→
PUSH SET
ZOOM/FOCUS
→
PUSH SET
ZONE SCALE ••••|••••
SET DEL – +
RET
ZONE setting menu
** ZONE NUMBER 1*/8 **
PAN/TILT
→
PUSH SET
ZOOM/FOCUS
→
PUSH SET
ZONE SCALE ••••|••••
SET DEL – +
RET
ZONE setting menu