Panasonic 3000 - Manual (Page 90)

ADVANCED FEATURES
90
Inbound Routing
Setting the Routing Parameters
The DP-2500/3000 can route documents received from a G3 fax machine to email address(s) or to Internet
Fax machine(s) connected to a LAN as an email, as well as to other G3 fax machine(s) over the telephone line.
To use this feature, the Fax Parameter No. 152 (SUB-ADDRESS ROUTING) and/or No. 153 (TSI ROUTING)
must be set to "Valid".
No. 152 (SUB-ADDRESS ROUTING): Set this parameter to perform an ITU-T sub-address query within its
auto dialer and to route the received document(s) to the corresponding stations email address(s) or telephone
number(s).
No. 153 (TSI ROUTING): Set this parameter to perform a Numeric ID (TSI frame information) query within its
auto dialer and to route the received document(s) to the corresponding stations email address(s) or telephone
number(s).
No. 154 (ROUTE HEADER FORMAT): Use this parameter to select the type of email header to be included in
the "From:" field of each routed faxes. (Default setting is "Originator")
Originator : The originating fax machine’s TSI will appear in the "From:" field of the routed email.
Relay Station : The routing station’s email address will appear in the "From:" field of the routed email.
No. 155 (PRINT ROUTED DOCUMENT) : Set this parameter to select whether a received fax to be routed is
always printed on the DP-2500/3000 or only when the routing operation fails.
Entering Phone Book Dialing Numbers for Inbound Routing
If the Inbound Routing parameters are set, an ITU-T sub-address and/or originator’s Numeric ID (TSI frame
information) can be programmed with each email address in Phone Book numbers.
Make sure that the INTERNET lamp is ON. If not, press to select the "INTERNET MODE".
1
EDIT PHONE BOOK PHONE BOOK
SELECT A FUNCTION
01 ADD TELEPHONE
02 ADD EMAIL ADDR.
03 MODIFY STATION
04 DELETE STATION
05
CANCEL O K