Panasonic DMP-BD30 - Manual (Page 7)

7
RQT9189
C Connecting to an HDMI compatible television and HDMI compatible amplifier/receiver
When connected to a compatible amplifier/receiver, you can enjoy surround sound recorded with Dolby Digital Plus, Dolby TrueHD or
DTS-HD.
NOTE
TIPS
NECESSARY SETTINGS
≥“HDMI Video Mode” and “HDMI Audio
Output” : “On” ( > 22)
≥“Speaker” : “Multi-Channel” (> 22)
≥“Digital Audio Output” : Depending on the
connected amplifier/receiver ( > 21)
With this connection, you can use VIERA
Link “HDAVI Control” (
> 17).
Connection methods for using other video terminals
D With S VIDEO OUT
The S VIDEO OUT terminal provides a more vivid picture than the VIDEO OUT terminal.
NOTE
≥High definition video cannot be output with
this connection.
Use connection
B (> 6), C or E for high
definition video.
≥Unplug the yellow plug of Audio/Video
cable.
≥Actual video quality depends on the
television.
E With COMPONENT VIDEO OUT
You can enjoy high definition images by connecting to a component video terminals that supports 720p (750p) and 1080i (1125i) signals.
NOTE
TIPS
≥Connect terminals of the same colour.
≥Unplug the yellow plug of Audio/Video
cable.
≥The video output resolution is restricted to
“576p/480p” when DVD-Video and
BD-Video discs recorded at a rate of
50 frames per second is output from the
COMPONENT VIDEO OUT terminals.
If you have a regular television (CRT:
cathode ray tube)
≥Progressive output may cause some
flickering, even if it is progressive
compatible. Turn off “Progressive” if you are
concerned about it. This is the same for
multi system televisions using PAL mode.
(
> 19, “Progressive”)
To enjoy high definition/progressive video
≥Connect to a television that supports 576p/
480p or higher.
≥Set “Component Resolution” to “576p/
480p”, “720p” or “1080i”. ( > 22)
≥Set “HDMI Video Mode” to “Off”. (> 22)
Otherwise, the video is output as 576i/480i.
AC IN AV OUT FRONT R /R VIDEO OUT S VIDEO OUT OPTICAL
COAXIAL FRONT L /L
SUBWOOFER
CENTER SURROUND
AUDIO OUT COMPONENT VIDEO OUT DIGITAL AUDIO OUT (PCM/BITSTREAM)
2ch 5.1ch
Y PB
PR
L
R
L
R
Please
connect
directly
to TV.
HDMI IN
HDMI OUT
HDMI IN
HDMI AV OUT
Multi channel speakers HDMI
compatible
television
Back of the unit
AC mains lead
(included)
Connect only after all
other connections are
complete.
To a household mains socket
[For[Australia[and[New[Zealand]
(AC 230 to 240 V, 50 Hz)
[For[Asia] (AC 220 to 240 V, 50 Hz/60 Hz)
HDMI cable
HDMI compatible
amplifier/receiver
Cooling fan
FRONT R /R
VIDEO OUT S VIDEO OUT OPTICAL
COAXIAL FRONT L /L
SUBWOOFER
CENTER SURROUND
AUDIO OUT COMPONENT VIDEO OUT DIGITAL AUDIO
OUT
(PCM/BITSTREAM)
2ch 5.1ch
Y P B
P R
L
R
L
R
Please
connect
directly
to TV.
AUDIO IN
R L
S VIDEO IN
Back of the unit
Audio/Video
cable (included)
S Video cable
Television
COMPONENT
VIDEO IN
AUDIO IN
R L
FRONT R /R
VIDEO OUT S VIDEO OUT OPTICAL
COAXIAL FRONT L /L
SUBWOOFER
CENTER SURROUND
AUDIO OUT COMPONENT VIDEO OUT DIGITAL AUDIO
OUT (PCM/BITSTREAM)
2ch 5.1ch
Y P B
P R
L
R
L
R
Please
connect
directly
to TV.
Back of the unit
Audio/Video cable
(included) Component
Video cable
Television
Ge
tti
ng s
ta
rte
d
DMP-BD30GN&GCS-RQT9189_eng.book 7 ページ ２００８年１月３１日 木曜日 午後４時５２分