Panasonic UB-T761 - Manual (Page 60)

5. Disconnect the black cable and the white cable
from the clamper (B).
2
6. Unscrew the 7 screws and remove the hub PCB
shield plate.
7. Attach the install-free kit to the main unit as
shown below.
8. Attach the hub PCB shield plate to the main unit
using the 7 screws and fix the black cable and
white cable to their previous positions using the
clamper.
9. Attach the control-power cover-front to the
main unit using the 4 screws.
10. Attach the connectors from the USB speakers
to the audio board and attach the front lower
frame cover to the main unit.
11. Fix the front lower frame cover using the 4
screws.
60 Operating Instructions (For Basic Operations)
Installation Manual