Panasonic UB-T761 - Manual (Page 18)

Connecting External Components
1. Set the power switch to "O" (OFF), connect the power cord (included) to the elite Panaboard, and
plug the power cord into an AC outlet.
Power Cord
Power Switch
(ON)
(OFF)
Rear
Power Cord
(Included)
• Plug the power cord into an outlet that is close to the elite Panaboard and in a location that is
easy to unplug.
• If you are using the optional stand, plug the power cord into the AC inlet, and secure the cord
as shown in the illustrations below.
When attaching the power cord
downward.
When attaching the power cord along the lower side of
the elite Panaboard.
• About Grounding
If you cannot connect the grounding line, contact your dealer. The cost of installing a grounding
connection is not included in the price of the elite Panaboard.
• The included power cord is exclusively for use with the elite Panaboard. Do not use it with any
other devices.
18 Operating Instructions (For Basic Operations)
Usage