PoGo Products PRY900M2 - Manual (Page 14)

Radio YourWay TM Series
10
7) Timer and recording
You need to set the current date and time prior to initiating a recording.
Press and hold the TIMER Button while the player is stopped.
When you hold the TIMER Button, the day will be flickering and then if
you press or you can change the day. Push the PLAY Button to
set and now the window displaying the time will also be flickering. If you
press
or you can change the hour, press PLAY again to set and
do the same thing to change the minute and press PLAY again to set.
When the time setting is completed, you may return to the initial screen
by pressing the STOP button.
To check the time, press the TIMER button, the current time
(hour/minute/second) will display, and if you want to change the time,
you may change the day/hour/minute by pressing and holding the
TIMER Button.
How to Record
When you are in VOICE/AM/FM Mode, you may record using the
RECORD Button.
Select the mode by pressing the MODE Button.
(When you are in the AM/FM Mode, the frequency currently received is
recorded).
Press and hold the RECORD (REC/STOP) Button for about 1 second
with the internal microphone toward the sound source.
The recording is initiated and a red light indicating recording turns ON.
To stop recording, press the STOP button.
Once recording is initiated, you may not stop recording for the first Five
(5) seconds.
The recording is automatically recorded in the next available slot.
When recording for a long time, replace the battery with a new one.
Check the capacity of the battery prior to recording.