Plantronics WG201/B - Manual (Page 9)

Plantronics Voyager PRO UC User Guide 9
Volume Up (+) and Down (-) Buttons
4 System Information
muting Headset During a Call
To mute a call, press and hold the volume + and - buttons
simultaneously until you hear a status prompt. The sequence
will start with low-high tones plus a voice prompt “Mute On” (in
English). The low-high tones repeat after 15 minutes to advise
mute is activated. The full sequence repeats every 30 minutes
until mute is de-activated.
To unmute a call, press and hold the volume + and - buttons
simultaneously until you hear high-low tones followed by a voice
prompt “Mute Off” (in English).
USB Adapter Indicator Light
USB Adapter Status Indicator Light
Headset in talk mode Flashes blue
USB adapter and headset pairing Flashes red and blue
Connected, no activity Solid blue
Powered on - headset not paired Solid red
Headset Controls and Indicators
Action Indicator Light tone
Power On/Off Press Power/Off button 2
seconds On: solid blue for 2 seconds
Off: solid red for 2 seconds On: ascending tone
Off: descending tone
Check if headset is powered on Short press call control button
or volume + or - button Short blue flash None
Incoming call None Flashes blue Three single low tones
Call answer/end Short press call control button Short blue flash Single low tone followed by low-
low-high tones
Adjust the volume (during a call) Short press volume + or -
button Single blue flash Tone at each change in volume.
Double tone when min/max
volume level reached
Call indicator light
(enable/disable) With headset powered on, press
power, volume + and - buttons
simultaneously for 1 second Turn indicator on: blue glow
increases for 2 seconds
Turn indicator off: blue glow
fades for 2 seconds Single low tone
Reconnect after leaving range for
more than 30 seconds Short press call control button Single blue flash Single low tone