Plantronics Clarity Walker 435 - Manual (Page 12)

12
Base Ringer
The base ringer includes ringer volume and
tones adjustments which are located on the
front of the telephone base.
Adjust the volume of ring by pressing the
VOLUME UP or DOWN switch until the
desired ring volume is achieved.
The tone of ring or cadence can also be
adjusted by pressing the RINGER TONES
button. Six (6) tones are available allowing
you to customize your ring. The ringer will
sound for two (2) seconds while choosing
a ringer tone, to allow the user to preview
the tone.
NOTE: If both handset and base ringer’s are
set to OFF, the visual ringer will flash to indi-
cate there is an incoming call.
Visual Ringers
Visual ringers are located in both the handset
antenna and the base of the telephone.
When an incoming call is received, these
lights will flash. The handset visual ringer will
also stay lit while the phone is in use.
Headset Jack
A 2.5mm jack is located on the top of the
telephone handset that can be used in
conjunction with a headset.
While in headset mode, the volume of the
headset is controlled by the telephone’s
volume control and the handset’s earpiece
and microphone are disabled.
Ordering a Headset
In the event you wish to purchase a
headset for your Clarity 435, please
contact Plantronics at 1-800-544-4660
for a location near you or visit
www.plantronics.com
Flash
The FLASH button is activated to use custom
calling services such as Call Waiting or
Three Way Calling. Please contact your local
telephone company for information on these
services.
Mute
The MUTE button allows the user to conduct
a private conversation that you do not want
the person on the other end to hear. While
in the mute mode, the TALK button will alter-
nately flash RED/ORANGE and the micro-
phone in the handset is disabled. Pressing
the MUTE button again will disengage the
MUTE feature.
Redial/Pause
The RD/P button operates both the last
number redial and the pause feature.
Operating Your Telephone
RINGER
RINGER
ON
VOLUME
TONES
PAGE
RING
ER
OFF O
N
OFF O
N