Enjoying high bit rate audio and video of bd-video, Regarding high bit rate audio secondary audio, Audio quality – Panasonic DMR-BW500 User Manual

Page 43: User setting, Regarding 24p output

Advertising
background image

43

RQT9131

Enjoying High Bit rate Audio and Video of BD-Video

This unit supports high bit rate audio (Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio and DTS-HD Master Audio) adopted in
BD-Video.
In order to enjoy these audio formats, connect this unit to your amplifier/receiver supporting HDMI Ver. 1.3 using a High Speed HDMI
cable (

95) and set “Priority Setting” (85) to “Audio Quality”.

However, there are the following restrictions.
≥The clicking sound on the menu and audio with secondary video cannot be output.

≥Any audio format not decoded by the connected amplifier/receiver cannot be output properly.
If you want to output the audio properly, set “Priority Setting” to “Secondary Audio” or “User Setting”.

Differences in audio output by setting

The output audio type can be changed depending on the menu settings.
Set “Priority Setting” in accordance with your favourite audio with reference to the following table.

[Note]

Enjoying 7.1ch LPCM
Connect this unit to your amplifier/receiver using an HDMI cable, and select “Audio Quality” or “User Setting” and then set “BD-Video Secondary
Audio” to “Off”.

When the unit is connected using the DIGITAL AUDIO OUT terminal, there are restrictions for high bit rate audio.

≥When “Secondary Audio” is selected, the audio is output in the formats enclosed in bold frames.

≥When“Audio Quality” is selected, the audio is output in the formats shown in the shaded area.

§

When playing BD-Video without secondary audio or clicking sound, the audio is output as the same format as if “BD-Video Secondary Audio”
was set to “Off”.

Many BD-Video movie contents are recorded in 24 frames/second in accordance with the film materials. However, they will normally be output in
60 frames/second in accordance with the display format.
These are output in 24p as the original. Therefore, high-quality video can be enjoyed, such as the improved clarity, enhanced perspective, etc.

[Required]connection]
≥Connect to a TV supporting 1080/24p input via an HDMI cable.
[Required]setting]

≥“BD-Video 24p Output”: “On” (

➡ 87)

Regarding High Bit rate Audio

Secondary

Audio

To enjoy secondary audio

Original audio

Dolby Digital Plus

Dolby TrueHD

DTS-HD High

Resolution Audio

DTS-HD Master

Audio

;

;

;

;

Audio formats are

output as:

PCM

≥“BD-Video Secondary Audio” is set to “On”, and “Dolby D/Dolby D +/Dolby TrueHD”, “DTS/DTS-HD”,

“MPEG” are fixed to “PCM”.

≥Data of 6 channels or more will be output in 5.1 channels. When playing BD-Video without secondary

audio or clicking sound, the audio is output as the same format as if “BD-Video Secondary Audio” was
set to “Off”.

Audio Quality

To enjoy high bit rate audio
Select this mode if your amplifier/receiver is equipped with these decoders.

Original audio

Dolby Digital Plus

Dolby TrueHD

DTS-HD High

Resolution Audio

DTS-HD Master

Audio

;

;

;

;

Audio formats are

output as:

Dolby Digital Plus

Dolby TrueHD

DTS-HD High

Resolution Audio

DTS-HD Master

Audio

≥“Dolby D/Dolby D +/Dolby TrueHD”, “DTS/DTS-HD”, “MPEG” are set to “Bitstream”, and ‘“BD-Video

Secondary Audio” is fixed to “Off”.
The clicking sound on the menu and audio with secondary video is not outputted.

User Setting

To set the high bit rate audio and secondary audio individually

“BD-Video Secondary Audio”: “On”

§

“BD-Video Secondary Audio”: “Off”

PCM

Bitstream

PCM

Bitstream

Maximum 5.1ch PCM

Dolby Digital

Maximum 5.1ch PCM

The original format

§

When playing BD-Video without secondary audio or clicking sound, the audio is output as the same
format as if “BD-Video Secondary Audio” was set to “Off”.

Original audio

PCM

Bitstream

“BD-Video Secondary Audio”:

“On”

§

“BD-Video Secondary Audio”:

“Off”

Dolby Digital Plus/Dolby TrueHD

(7.1ch)

Down-mixed 2ch PCM

Dolby Digital

Dolby Digital

DTS-HD High Resolution Audio/

DTS-HD Master Audio (7.1ch)

Down-mixed 2ch PCM

Dolby Digital

DTS Digital Surround

7.1ch LPCM

Down-mixed 2ch PCM

Down-mixed 2ch PCM

Down-mixed 2ch PCM

Regarding 24p output

Diff

e

re

n

t k

inds

of pla

y

ba

c

k

f

o

r

BD-V

ide

o

/E

n

jo

y

ing High Bit r

a

te

A

udio a

nd Vide

o of BD-V

ide

o

DMRBW500GN-RQT9131-L_eng.book 43 ページ 2008年5月12日 月曜日 午前9時37分

Advertising