Using the remote controller, Battery – Pioneer XDV-P90 User Manual

Page 11

Advertising
background image

Using the Remote Controller

This product is equipped with a remote controller for convenient operation.

• Point the controller in the direction of the unit or remote sensor to operate.

Precaution:

• Do not store the remote controller in high temperatures or direct sunlight.
• The controller may not function properly in direct sunlight.
• Do not let the remote controller fall onto the floor, where it may become jammed under the

brake or accelerator pedal.

Battery

• Slide the tray out on the back of the remote controller and insert the bat-

tery with the (+) and (–) poles pointing in the proper direction.

Note:

• When using for the first time, pull out the film protruding from the tray.

Replacing the Lithium Battery:

• Use only lithium battery “CR2025”, 3 V.

Precaution:

• Remove the battery if the remote controller is not used for a month or longer.
• If the event of battery leakage, wipe the remote controller completely clean and install a new bat-

tery.

WARNING:

• Keep the lithium battery out of reach of children. Should the battery be swallowed,

immediately consult a doctor.

CAUTION:

• Do not recharge, disassemble, heat or dispose of battery in a fire.
• Use a CR2025 (3 V) lithium battery only. Never use other types of battery with this

unit.

• Do not handle the battery with metallic tools.
• Do not store the lithium battery with metallic materials.
• When disposing of used batteries, please comply with governmental regulations or

environmental public institution’s rules that apply in your country/area.

• Always check carefully that you are loading the battery with its (+) and (–) poles

facing in the proper directions.

8

Before Using

Advertising