Pioneer DEH-P7900UB - Manual (Page 42)

42
EN
G
L
IS
H
Available accessories
Function and operation
Play mode, Random mode, Scan mode, Pause, Compression and TitleInput "A"
operations are basically the same as that of the built-in CD player.
Notes
• If you select other discs during repeat play, the repeat play range changes to M-CD repeat.
• If you perform track search or fast forward/reverse during Track repeat, the repeat play
range changes to Disc repeat.
• After track or disc scanning is finished, normal playback of the tracks will begin again.
• When playing a CD TEXT disc on a CD TEXT compatible multi-CD player, you cannot switch
to TitleInput "A". The disc title has already been recorded on a CD TEXT disc.
Using ITS playlists
ITS (instant track selection) lets you make a playlist of favorite tracks from those in the
multi-CD player magazine. After you have added your favorite tracks to the playlist you
can turn on ITS play and play just those selections.
You can use ITS to enter and play back up to 99 tracks per disc from up to 100 discs
(with the disc titles). (With multi-CD players sold before the CDX-P1250 and CDX-
P650, up to 24 tracks can be stored in the playlist.)
Function name Operation
Play mode Refer to “Selecting a repeat play range” on page 17.
But the repeat play ranges you can select are different from that of the
built-in CD player. The repeat play ranges of the multi-CD player are as
below:
• M-CD repeat – Repeat all discs in the multi-CD player
• Track repeat – Repeat just the current track
• Disc repeat – Repeat the current disc
Random mode Refer to “Playing tracks in random order” on page 17.
Scan mode Refer to “Scanning folders and tracks” on page 17.
Pause Refer to “Pausing disc playback” on page 17.
Compression Refer to “Using compression and BMX” on page 18.
Multi-CD player has DBE (dynamic bass emphasis) function instead of
BMX.
The settings can be switched as below:
COMP OFF – COMP 1 – COMP 2 – COMP OFF – DBE 1 – DBE 2
ITS play mode Refer to “Using ITS playlists” on page 42.
ITS memo Refer to “Using ITS playlists” on page 42.
TitleInput "A" Refer to “Entering disc titles” on page 18.
Creating a playlist with ITS programming
1. Play a CD that you want to program.
Push MULTI-CONTROL up or down to select the CD.
2. Use MULTI-CONTROL to select ITS memo in the function menu.
3. Select the desired track by pushing MULTI-CONTROL left or right.
4. Push MULTI-CONTROL up to store the currently playing track in the playlist.
Memory complete is displayed and the currently playing selection is added to your
playlist.
5. Press BAND to return to the playback display.
Note
• After data for 100 discs has been stored in memory, data for a new disc will overwrite the
oldest one.
Playback from your ITS playlist
ITS play lets you listen to the tracks that you have entered into your ITS playlist. When
you turn on ITS play, tracks from your ITS playlist in the multi-CD player will begin to
play.
1. Select the repeat range.
Refer to “Playing tracks in random order” on page 17.
2. Use MULTI-CONTROL to select ITS play mode in the function menu.
3. Press MULTI-CONTROL to turn ITS play on.
ITS play mode appears in the display. Playback begins of those tracks from your
playlist within the previously selected M-CD repeat or Disc repeat ranges.
• If no tracks in the current range are programmed for ITS play, then ITS empty is
displayed.
• To turn ITS play off, press MULTI-CONTROL again.
MAN-DEH-P7900UB-GB.fm Page 42 Wednesday, February 21, 2007 11:20 AM