Questions and answers – PS Audio TRIO A-100 User Manual

Page 9

Advertising
background image

4826 Sterling Drive, Boulder, CO 80301

PH: 720.406.8946 [email protected] www.psaudio.com

Questions and Answers 5

®

Questions And Answers

©2004 PS Audio International Inc. All rights reserved.

Owner’s Reference

A-100 Power Amplifi er

higher wattage model should be considered.

The A-100 Power Amplifi er is specifi c to your country’s voltage. Do not use the A-100 Power Amplifi er
on a voltage higher than it is rated for. For instance, do not take a 120 volt rated A-100 Power
Amplifi er and attempt to use it in a 230 volt country. Failure to observe this cautionary note will void
your warranty and may damage the amplifi er. If you need to operate the A-100 Power Amplifi er at a
voltage other than the voltage it was designed for, contact your dealer, distributor or the factory.

If the A-100 Power Amplifi er protection circuitry is activated, the amplifi er will immediately shut off.
You need to switch off the rear power switch and then turn it back on to reset the amplifi er’s protection
circuitry.

The A-100 Power Amplifi er produces little heat under normal operation.

Protection circuitry

What voltages
can the amp run
on?

Does the amp
require ventilation?

Advertising