Panasonic KX-PX10M - Manual (Page 103)

103
Others
Message Remedy Page
• Unable to use this SD
card or Multimedia
card. (U36)
• Unable to read the SD
card or Multimedia
card.
Cancelling the print
job from the SD card
or Multimedia card.
(U38)
• Unable to read the SD
card or Multimedia
card. (U39)
• You are using a memory card that is not compatible.
Please use a memory card that is compatible with
this printer. Memory cards using a FAT32 formatted
by computer or other devices cannot be used. Be
sure to use memory cards with a FAT16 formatted
by a digital camera.
104
Maintenance
• When the feed roller and/or paper support lever are dirty
Clear prints may become impossible if the feed roller or paper support lever become dirty.
Wipe clean with a damp cloth that has been wrung thoroughly.
• Wiping the printer surface
To clean the printer surface, wipe up any dust with a soft dry cloth. If the printer is particularly
dirty, soak the cloth in kitchen detergent (neutral) diluted with water and wring the cloth out
thoroughly. Then wipe off the dust with the cloth and wipe again with a dry cloth. When using
a chemical cleaning cloth, follow the precautions outlined in the guideline instructions.
• Air vents
If dust enters from the air vents, it can accumulate on the ink sheet compromising print
quality.
As dust builds up, the printer’s air vents can be blocked, which could hamper safe operation
of the printer. (
p. 6, “Important Safety Instructions”)
If this occurs, remove the ink cassette and clean the dust off the ink sheet using a vacuum
cleaner.
Feed roller
Paper support lever