Piega PS 1 - Manual (Page 8)

Setup Procedure
This connection configuration for 5.1 surround applications uses an AV receiver with a separate subwoofer
output. Since the AV receiver handles the bass management in this configuration, the settings for each loud-
speaker can be adjusted individually via the menu. Note: in this case, the LOW PASS setting of the subwoofer
has no effect. Refer to the user manual of your AV receiver for information on the individual setup controls.
Dolby Digital System – Surround-System with AV-Receiver
Connection:
Connect the subwoofer cable to the terminal marked
SUBWOOFER (or similar) on the AV receiver
Connect the subwoofer cable to the terminal on the
subwoofer marked LFE
Please use a suitable connection cable with cinch
plugs (not supplied with the PS 1 / PS 2)
Connect the front, rear and center loudspeakers us-
ing the loudspeaker terminals provided on your AV
receiver
Subwoofer L
R
Front R Rear R Center Rear L Front L
Amplifier
Front
Speaker R
Front
Speaker L
Center
Speaker
Rear
Speaker R
Rear
Speaker L
L R
L R
LFE
LINE IN
LINE O
U
T
8 PIEGA PS 1 / PS 2 User Manual