Panasonic SL-CT510 - Manual (Page 6)

Surround
effects
( ➪ below)
SRD
A B
SRD
ALBUM
MODE
SRD
2- - 14
ALBUM
SRD
1
3
2
3 - - 01
M
4
SRD
Playing MP3
Starting play from an album (Album skip)
Press and hold [ : ] or [ 9 ] until the album
you want appears.
Album number Number of tracks
Playing only the tracks in a selected album (Album mode)
Each time you press and hold [MODE]
No display (canceled)
≥ You can select another album with album skip. ( ➪ above)
≥ You cannot turn album mode on during program play.
MP3
This unit can play MP3, a method of compressing audio without overtly hurting
audio quality.
∫ When creating MP3 files to play on this unit
Disc formats: ISO9660 level 1 and level 2 (except for extended formats)
∫ Limitations on MP3
≥ This unit is compatible with multi-session but if there are a lot of sessions it
takes more time for play to start. Keep the number of sessions to a minimum to
avoid this.
≥ This unit cannot play files recorded using packet write.
≥ If a CD-ROM format CD contains MP3 and files other than MP3, only the MP3
files will be playable.
≥ Depending on how you create MP3 files, they may not play in the order you
numbered them or may not play at all.
001track.mp3
002track.mp3
003track.MP3
001album
CD-ROM drive
1
001track.mp3
Up to 30 characters
Prefix with 3-digit numbers in the order you want to play
Naming tracks and albums
Extension
(or.MP3)
002album
004track.mp3
005track.mp3 2
004album
008track.MP3
009track.MP3
003album
006track.mp3
007track.MP3 4
3
Other Play Methods
Program Play
Play modes
Track number Sequence number
While stopped, press[ : ] or
[ 9 ] to select the track.
You can skip albums when programming
MP3 tracks
(
➪ below).
Press [MEMORY] to register.
Press [1/∫] to start play.
Repeat steps 1 and 2 to register up
to 20 tracks.
∫ To cancel program play
Press [1/∫].
∫ To confirm the contents
of the program
∫ Press [MEMORY] while the
disc is playing.
Changing the sound quality
When Playing MP3
Sequence
number
Album number Track number
Each time you press [EQ]
Boosts
the bass
Enhanced
S-XBS
Each time you press [MODE]
One track
repeat
All track
repeat
Random Random
repeat
No display
(canceled)
≥ The effect may differ between different kinds of music.
≥ You cannot select “RND” and “A`B” while playing MP3.
- - 01
5 1
ALBUM M
M
Anti-Skip System
This system reduces skipping caused by vibration to a minimum.
You can change the anti-skip memory time for CD-DA to improve sound quality.
While stopped, each time you press and hold [MEMORY]
≥ You cannot change the memory time for MP3. It is a maximum of 100 seconds for MP3
recorded at 128 kbps.
Anti-skip enhanced mode,
45-second anti-skip memory
Sound enhanced mode,
10-second anti-skip memory
Main unit
If you created an album such as 004album on
the left, the files may not play in name order.
The albums would play in the order 1, 2, 3,
4.
Album mode
RQT7311
6
or
While paused
During play
AB repeat (AB specified
segment repeat) ( ➪below)
∫ Specifying the AB segment
Press [MEMORY] at the start point (A) and once more at the end point (B).
≥ Stop or skip ( ➪ page 5) to cancel.
≥ If you do not specify point B and reach the end of disc, point B is set automatically and
repeat begins. You can also specify point B again by pressing [MEMORY].
Enjoying even more natural sound (Digital Re-master)
You can regenerate signal frequency lost during compression, restoring to near
pre-compression form.
While stopped, each time you press and hold [MEMORY]
Sound enhanced Conserves battery life
No display
(canceled)
∫ Changing the surround effect
1 While “SRD” is flashing, press [:, SRD] or [9, SRD] to select the desired surround.
HALL : Similar to sound heard at a concert hall
L-HALL : Enhanced version of HALL
Air
: More natural sound
Club : Similar to sound heard at a live house
L-Club : Enhanced version of Club
FLOAt : Similar to listening to sound in a serene space
SPACE : Similar to listening to sound in a wide open space
StAGE
: Similar to sound heard on stage
2 Press [MEMORY] to enter.
≥
After the surround setting is selected, if there are no operations within 20 seconds the
setting is automatically set.
Changing the remote control operation tone
Each time you press and hold [EQ]
bP on bP oFF
Tone on Tone off
No display (canceled)
SRD
Reduces sound
leaks and listening
fatigue