Pioneer PD-M427 - Manual (Page 6)

6
En
NOTES:
÷ When a control cord is connected to the player’s CONTROL
IN jack, direct control of the player with the remote control
unit is not possible. Operate the player with the remote
control unit by aiming it at the amplifier.
÷ Be sure to connect both of the control cord’s plugs securely
to the CONTROL IN and CONTROL OUT terminals. Do not
connect only one end of the cable.
÷ Be sure to turn off the power of the amplifier before
connecting the power cord and output cord.
Connecting the power cord
Connect the power cord to a household AC wall outlet or an
AC outlet on your amplifier.
÷ Make sure plugs are inserted fully into the jacks and wall
outlet.
Making connections
1. Connect the LINE OUT jacks of this unit to the
input jacks (CD or AUX) of the amplifier. Make
sure that the white plugs are connected to the
left (L) jacks and the red plugs to the right (R)
jacks.
÷ Be sure not to connect this unit to the amplifier’s
PHONO jacks, as sound will be distorted and normal
playback will not be possible.
2. Connect the power cord to a household AC wall
outlet or an AC outlet on your amplifier.
÷ Make sure plugs are inserted fully into the jacks and wall
outlet.
System remote control with a Pioneer stereo
amplifier that has the
Î mark
When a Pioneer stereo amplifier bearing the Î mark is used,
connect the CONTROL IN jack on the rear panel of the CD
player to the CONTROL OUT jack of the amplifier. This will
enable the CD player to be controlled using the remote control
unit supplied with the stereo amplifier. If you do not plan to
use this feature, it is not necessary to connect CONTROL IN/
OUT jacks.
÷ Be sure to use the supplied control cable.
÷ The remote control unit supplied with the amplifier can be
used to control Play, Stop, Pause, Track/Disc Search and
Disc Change operations.
÷ For instructions regarding connections and operation, refer
to the operating instruction manual provided with your
stereo amplifier.
÷ Before making or changing the connections, switch
off the STANDBY/ON switch and disconnect the power
cord from the AC outlet.
Power cord
Red
Control cable
White
AC POWER CORD CONNECTION AND
FUNCTIONS
Some functions cannot be carried out depending on the
connection of AC power cord.
Function
Timer playback
Program
memory
Delete program
memory
When the AC power
cord is connected to the
switched outlet of an
amplifier or audio timer When the AC power
cord is connected to
t h e u n s w i t c h e d
outlet of an amplifier
or wall outlet
For details, refer to the description of each function in these
Operating Instructions.
To AC
Wall outlet
CD player
Output cable
White
Red
Stereo amplifier
Yes
No
No
No
Yes
Yes
CONTROL
L
R
IN OUT
LINE OUT
CD
L
R
L
R
R
L
CONTROL
OUT
CONNECTIONS