Reinstalling software – Panasonic CF-F9 User Manual

Page 24

Advertising
background image

24

Reinstalling Software

Getting Started

Usef

ul Inform

ation

Troubleshooting

Appendix

13

At the confirmation message, click [YES].

Reinstallation starts automatically. (It will take approximately 30 - 80 minutes.)
z

Do not interrupt reinstallation, for example by turning off the computer. Otherwise reinstallation may become
unavailable as Windows may not start up or the data may be corrupted.

z

According to the instruction on the screen, switch Product Recovery DVD-ROM.

14

Remove the Product Recovery DVD-ROM, and then click [OK] to turn off the computer.

15

Turn on the computer.

z

If the password is requested, enter the Supervisor Password.

16

Perform the “First-time Operation” (Î page 13).

17

Start the Setup Utility and change the settings as necessary.

18

Perform Windows Update.

10

Press

1

to execute [1. [Recovery]].

The License Agreement screen appears.
z

To cancel partway, press 0.

11

Press

1

to select [1. Yes, I agree to the provisions above and wish to continue!].

12

Select the settings.

When installing Windows XP into hard disk installed from Windows 7, select 1 or 2.
Do not select [3]: This option is only available when using Windows XP.
If you select [3]: an error may occur during the installation.

13

At the confirmation message, press

Y

.

Reinstallation starts automatically. (It will take approximately 30 - 60 minutes.)
z

Do not interrupt reinstallation, for example by turning off the computer or pressing Ctrl + Alt + Del. Other-
wise reinstallation may become unavailable as Windows may not start up or the data may be corrupted.

14

Remove the Product Recovery DVD-ROM, and then click [OK] to turn off the computer.

z

If additional instructions are included with the computer, be sure to read them. It may be necessary to perform
additional operations during the following procedure.

15

Turn on the computer.

z

If the password is requested, enter the Supervisor Password.

16

Perform the “First-time Operation” (Î page 13).

17

Start the Setup Utility and change the settings as necessary.

CF-F9mk2(CPE02288ZA)_OI_EU_EN.book 24 ページ 2010年7月21日 水曜日 午前11時46分

Advertising