Peavey SP 3G User Manual

Specs, Sound reinforcement enclosure with sound guard, Hf protection system

Advertising
background image

SPECS

P E A V E Y E L E C T R O N I C S

SP

3G

Sound Reinforcement
Enclosure with
Sound Guard

HF

Protection System

SPECIFICATIONS

Frequency Response, 1 Meter
On-Axis, Swept-Sine in Anechoic
Environment:

54 Hz to 17 kHz

Low-Frequency Cut-Off (-3 dB point):

54 Hz

Usable Low-Frequency Limit
(-10 dB point):

47 Hz

Power Handling:

Full-Range:
350 W continuous (52.9V RMS)
700 W program
1,400 W peak

Bi-amp Low:
350 W continuous (52.9 V RMS)
700 W program
1,400 W peak

Bi-amp High:
150 W continuous (34.6 V RMS)
300 W program
600 W peak

Sound Pressure Level, 1 Watt, 1
Meter in Anechoic Environment:

Full-Range:

99 dB (2.8 V)

Bi-amp Low:

100 dB (2.8 V)

Bi-amp High:

99 dB (2.8 V)

Maximum Sound Pressure Level
(1 meter):

Full-Range:
125 dB continuous
131 dB peak

Bi-amp Low:
126 dB continuous
132 dB peak

Bi-amp High:
120 dB continuous
127 dB peak

Radiation Angle Measured at -6 dB
Point of Polar Response:

500 Hz to 1.6 kHz:
Horizontal: 122

°

±

-15

°

Vertical: 152

°

±

-38

°

1.6 kHz to 5 kHz:
Horizontal: 79

°

±

21

°

Vertical: 83

°

±

22

°

5 kHz to 16 kHz:
Horizontal: 87

°

±

10

°

Vertical: 45

°

±

4

°

Directivity Factor, Q (Mean):

8

±

4.3

Directivity Index, Di (Mean):

8.3 dB

±

2.8 dB

Transducer Complement:

1505-8 KADT Black Widow

®

woofer

6.5" Pro mid-range driver
22XT compression driver

Box Tuning Frequency:

58 Hz

Crossover Frequency (internal
passive):

800 Hz

Minimum Recommended Active
Crossover Frequency and Slope for
Bi-amping:

800 Hz at 18 dB/octave

Time Offset:

0.14 mS (delay Lows)

Impedance (Z):

Full-Range Nominal:

8

Full-Range Minimum:

5.3

Lows Nominal:

8

Highs Nominal:

8

Input Connections:

Two paralleled 1/4" phone jacks for

full-range

One 1/4" phone jack for bi-amp low
One 1/4" phone jack for high and mid bi-

amp

Enclosure Materials & Finish:

3/4" plywood enclosure covered with black

carpet and protective polymer corners

Expanded metal grille to protect the mid

and low drivers

Mounting Provisions:

One SA-1 stand mount on bottom of

enclosure.

Dimensions (H x W x D):

33.50" x 21.50" x 22.50"
(85.1 cm x 54.6 cm x 57.1 cm)
Rear width 14.25" (36.1 cm)

®

Advertising