3 remove the usb key, Product registration and activation key retrieval, 3 select the product registration link – Polycom DOC2564A User Manual
Page 5: Connecting to the mcu
5
During the first-time power-up the red ERR LED on the RMX’s
front panel remains ON until both the Management and IP
Network Services have been defined.
When the RMX's configuration is completed (including the
Management and IP Network Services), and if there are no System
Errors, the green RDY LED on the CNTL module (on the RMX’s
front panel) turns ON.
3
Remove the USB key.
Product Registration and Activation Key Retrieval
Before starting the initial configuration process, register the RMX at the
Polycom Resource Center website and download the product activation
key file to the computer you will use for the configuration:
1
Using a Web browser, connect to
2
Login with your Email Address and Password or register as a new
user.
3
Select the Product Registration link.
4
Follow the on-screen instructions for Product Registration and
Product Activation.
5
Write down the Product Activation Key number or copy it for later
use.
Connecting to the MCU
1
Start the RMX Web Client application on the workstation by
entering in the browser’s address line the IP Address of the control
unit as defined in the USB key in the format:
http://<Control Unit IP Address>
and pressing Enter.
2
In the RMX Web Client Welcome Screen, enter the default Username
(
POLYCOM) and Password (POLYCOM) and click Login.
The RMX Web Client opens.
An MCU State indicator displays a progress indicator showing the
time remaining until the system start-up is complete.