Panasonic SC-HT692 - Manual (Page 8)

8
RQT7433
Ra
di
o and s
yst
em con
n
ec
ti
on
Do not:
≥mix old and new batteries.
≥use different types at the same time.
≥heat or expose to flame.
≥take apart or short circuit.
≥attempt to recharge alkaline or manganese batteries.
≥use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can
damage items the fluid contacts and may cause a fire.
Remove if the remote control is not going to be used for a long
period of time. Store in a cool, dark place.
∫ Use
Aim at the sensor (‹ page 9), avoiding obstacles, at a maximum
range of 7 m (23 feet) directly in front of the unit.
STEP
4
Radio and system connection
COMPONENT VIDEO OUT (480P/480I)
Y P B
P R
LINE
OUT AUX
TV
AUDIO
IN
VCR
AUDIO
IN
S
VIDEO
OUT
L
R EXT
LOOP A
AM ANT
1
2
VOLT ADJ
127 V 110 V 220 V-230 V 240 V
Subwoofer
Adhesive tape
Fix the other end of the
antenna where reception is
best.
System cable
To household AC outlet
Catch up
To disconnect
Press the catch
and pull out.
To disconnect
Press the catch
and pull out.
[For\areas\except\U.S.A.\and\Canada]
≥If the power plug will not fit your AC outlet
Use the power plug adaptor (included).
If it still doesn’t fit, contact an electrical parts
distributor for assistance.
[For[areas[except[U.S.A.[and[Canada[
Before connecting the
AC power supply cord
Set the voltage.
Use a flat-head screwdriver to turn
the voltage selector on the back of
the subwoofer to the appropriate
position for the area in which this
system is used.
If the power supply in your area is
115 V or 120 V, please set the voltage
selector as follows:
≥For 115 V: Set to 110 V.
≥For 120 V: Set to 127 V.
AC power supply cord
Conserving power
The main unit consumes a small amount of power, even when it is turned off
(For U.S.A. and Canada: approx. 0.4 W or for units with PX printed on the
outer packaging and Latin America: approx. 0.9 W). To save power when the
unit is not to be used for a long time, unplug it from the household AC outlet.
You will need to reset some memory items after plugging in the unit.
Main unit
≥Connect the AC power supply cord after all other connections are complete.
≥Optional antenna connections (‹ page 23).
AM loop antenna
Stand the antenna up on
its base. Place the
antenna where the
reception is best.
Keep loose antenna
cable away from other
wires and cables.
Catch up
Click!
System cable AM loop antenna FM indoor antenna AC power supply cord
\U.S.A.\and\Canada] \Others]
Power plug adaptor
\Areas\except\U.S.A.\and\Canada]
FM indoor antenna
STEP
5
The remote control
R6/LR6, AA, UM-3
2
3
1 ≥Do not use
rechargeable type
batteries.
Remote control Batteries
Insert so the poles ( i and j) match those
in the remote control.