Removing the front panel 4, Attaching the front panel 4, After-sales service for pioneer products – Pioneer DEH-17 User Manual

Page 4: Product registration, Protecting your unit from theft, Before you start

Advertising
background image

After-sales service for

Pioneer products

Please contact the dealer or distributor from

where you purchased this unit for after-sales

service (including warranty conditions) or any

other information. In case the necessary infor-

mation is not available, please contact the

companies listed below:

Please do not ship your unit to the companies

at the addresses listed below for repair without

advance contact.

U.S.A.
Pioneer Electronics (USA) Inc.
CUSTOMER SUPPORT DIVISION
P.O. Box 1760
Long Beach, CA 90801-1760
800-421-1404
CANADA
Pioneer Electronics of Canada, Inc.
CUSTOMER SATISFACTION DEPARTMENT
300 Allstate Parkway
Markham, Ontario L3R OP2
1-877-283-5901

For warranty information please see the Lim-

ited Warranty sheet included with this unit.

Product registration

Visit us at the following site:

1 Register your product. We will keep the details

of your purchase on file to help you refer to
this information in the event of an insurance
claim such as loss or theft.

2 Receive updates on the latest products and

technologies.

3 Download owners manuals, order product

catalogues, research new products, and
much more.

Protecting your unit from

theft

The front panel can be detached from the

head unit to discourage theft.

Important

! Never use force or grip the display and the

buttons too tightly when removing or attach-
ing.

! Avoid subjecting the front panel to excessive

shocks.

! Keep the front panel out of direct sunlight and

high temperatures.

Removing the front panel

1 Press DETACH to release the front

panel.

Press DETACH and the right side of the panel

is released from the head unit.

2 Grab the front panel and remove.

Grab the right side of the front panel and pull

away to the left. The front panel will be de-

tached from the head unit.

Attaching the front panel

1 Place the front panel flat against the

head unit.

2 Press the front panel into the face of

the head unit until it is firmly seated.

Before You Start

En

4

Section

01

Advertising