Panasonic TY-EW3D10U - Manual (Page 4)

4
Identifying Controls
„
Battery case
Fitting the battery ( page 9)
When using for the first time, remove the insulating sheet.
( page 7)
„ Liquid Crystal Shutter
(lens)
Controls the images for 3D viewing.
The left and right liquid crystal
shutters are alternately opened
and closed in time with the left
side and right side images that
are alternately displayed on the
television to achieve the 3D effect.
„ Nose pad installation section
(3D Eyewear inner section)
( page 7)
Specialized band can be attached
here. ( page 7)
„
Infra-red receiver
Receives infra-red signals from the television.
The liquid crystal shutter open/close timing is controlled by
receiving infra-red signals from the television, which provide 3D
expression of the images.
„ Power button (bottom side of
3D Eyewear)
Switches on the 3D Eyewear power.
Press and hold the power button for
approximately 1 second to switch the
power on, and the power lamp lights for
approximately 2 seconds.
To switch the power off, press and hold the
power button for approximately 1 second.
(The power lamp flashes 3 times, then the
power switches off.)
Power button
Power lamp