Paradyne COMSPHERE 3000 - Manual (Page 33)

COMSPHERE 3000 Series Carrier
3-6 December 1994 3000-A2-GA31-80
Figure 3-2. COMSPHERE 3000 Series Carrier Mounting Brackets
Installation
The cabinet that the carrier will be installed in may or
may not have threaded screw holes.
•
If the cabinet has threaded screw holes, use the
short Phillip-head screws included in the hardware
package and follow the first procedure in this
section.
•
If the cabinet does not have threaded screw holes,
use the speed nuts and the longer Phillips-head
screws (that look like washers are molded onto
them) included in the hardware package and follow
the second procedure in this section.
NOTE
Installing the carrier may be a
2 person task; one person to hold
the carrier in proper alignment,
and one person to install the
screws.