Pure Acoustics DMX-50 - Manual (Page 19)

Gr
eat Britain
17
General setup options
Push the menu button to access general setup options, available at all times. Choose
one of the following options:
Audio
Tone
Turn the TUNE/SELECT dial to set the Bass output level. Press the Tuning dial
again to set the Treble level.
Balance
Turn the TUNE/SELECT dial to adjust the audio balance between left and right.
Subwoofer
Push the TUNE/SELECT dial to specify if you have an active subwoofer connected
to your LINE/SUB OUT socket:
YES LINE/SUB OUT will be a variable level output and will mute if headphones
are inserted.
NO LINE/SUB OUT will be a fixed line level output and will not mute if
headphones are inserted.
Screen
Active settings
Turn the TUNE/SELECT dial to set the screen backlight brightness. Press the
Tuning dial again to set the contrast.
Standby settings
Turn the TUNE/SELECT dial to select the standby screen brightness level
Note if you set the backlight to its lowest setting (Screen off) in standby the
blue power standby LED will not light up and you will not see the clock in
standby. If you set it to the 2nd lowest (Backlight off) you will see the clock
but no standby LED.
Alarm
To set an alarm, which will switch the unit on (if in standby) and tune to a
station or sound a tone:
Turn the TUNE/SELECT dial or use the +/- shortcut buttons to set an alarm
time, Mode [DAB/FM/Tone] and set the Alarm [On]. Radio alarms tune to the
station you were tuned to last in that mode and to the volume the radio was
set to at the time the alarm went off. When the alarm is set you see the Alarm
icon (
) on the screen. The alarm icon flashes when the alarm goes off.
To cancel the alarm and leave the unit switched on press the TUNE/SELECT
dial or press the POWER button to cancel the alarm and switch off.
Sleep timer
Turn the Tuning dial or use the +/- shortcut keys to set a time after which you
want your DMX-50 to switch off. Choose between 15, 30, 45, 1hr, 1hr 15 and
1hr 30 minutes. To switch a sleep timer off use the Clear shortcut button or
set the time to zero.
S/W version
Displays the current software version installed on your DMX-50, 16-digit unit
serial number and gives access to the Software Upgrade option.
Register your product and include an e-mail address to receive notification of
software updates or visit our website at www.pure.com/support.
To upgrade your software, press the S/W upgrade shortcut button and follow
the instructions on screen.
Au d i o M e n u
To n e
Ba la n ce
S u b w o o f e r [ N O ]
Audio options
S c r e e n Co n t r o l s
Br i g h t n e s s
Co n t r a s t
-
-
Active screen settings
Cl e a r
S l e e p T i m e r
-
Sleep timer settings
Al a r m [ O f f ] M o d e [ D AB]
Ala r m
- -
h h m m
Alarm settings
V1.0
S / W u p g r a d e E x i t
0 5 0 2 1 5 1 2 0 4 2 8 1 F 2 7
0 0 0 0 1 6 1 7 F F F F A10 0
S/W version screen