Patton electronic 2701/B - Manual (Page 4)

4
1.0 WARRANTY INFORMATION
Patton Electronics warrants all Model 2701/I components to be free from
defects, and will—at our option—repair or replace the product should it
fail within one year from the first date of shipment.
This warranty is limited to defects in workmanship or materials, and does
not cover customer damage, abuse, or unauthorized modification. If this
product fails or does not perform as warranted, your sole recourse shall
be repair or replacement as described above. Under no condition shall
Patton Electronics be liable for any damages incurred by the use of this
product. These damages include, but are not limited to, the following: lost
profits, lost savings and incidental or consequential damages arising
from the use of or inability to use this product. Patton Electronics specifi-
cally disclaims all other warranties, expressed or implied, and the instal-
lation or use of this product shall be deemed an acceptance of these
terms by the user.
1.1 RADIO AND TV INTERFERENCE
The Model 2701 generates and uses radio frequency energy, and if not
installed and used properly—that is, in strict accordance with the manu-
facturer's instructions—may cause interference to radio and television
reception. The Model 2701 has been tested and found to comply with the
limits for a Class A computing device in accordance with the specifica-
tions in Subpart J of Part 15 of FCC rules, which are designed to provide
reasonable protection from such interference in a commercial installa-
tion. However, there is no guarantee that interference will not occur in a
particular installation. If the Model 2701 does cause interference to radio
or television reception, which can be determined by disconnecting the
cables, the user is encouraged to try to correct the interference by one or
more of the following measures: moving the computing equipment away
from the receiver, re-orienting the receiving antenna, and/or plugging the
receiving equipment into a different AC outlet (such that the computing
equipment and receiver are on different branches).
1.2 CE NOTICE
The CE symbol on your Patton Electronics equipment indicates that it is
in compliance with the Electromagnetic Compatibility (EMC) directive
and the Low Voltage Directive (LVD) of the Union European (EU). A Cer-
tificate of Compliance is available by contacting Technical Support.