Panasonic PT-60LC14 - Manual (Page 12)

12 For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo
Connecting the Antenna / Cable to the RF IN Terminal (No VCR)
Antenna Connection
For proper reception of VHF/UHF channels, an external antenna is required. For best reception an outdoor
antenna is recommended.
When using “Nut type” RF coaxial cables, tighten with fingers only. Overtightening may damage terminals.
• Turn off the power supply for all com ponents before making any connections.
• If the cables necessary for connecting a component to the system are not included with the component or available as an
option, you may need to fashion a cable to suit the component concerned.
• Read the instruction manual for each system component care fully before connecting it.
• If there is a lot of jitter in the video signal input from the video source, the picture on the screen may flicker. In this case, it will
be necessary to connect a TBC (time base corrector).
Notes on con nections
Installation
VHF/UHF TERMINAL
ON THE BACK OF THE
PROJECTION DISPLAY RF Coaxial Cable
Mixer
VHF Antenna UHF Antenna
CAUTION