18 disc playback – Philips DVP3050V/37 User Manual

Page 18

Advertising
background image

English

18 Disc Playback

• An “X” may appear at the top right

corner of the TV screen when you
try a feature. Either the feature is
not available on the Disc, or the
DVD/VCR cannot access the
feature at this time.This does not
indicate a problem with the
DVD/VCR.

• If a Disc is dirty or scratched, the

picture may appear distorted or
playback may stop. In such cases,
remove the Disc and turn off the
DVD/VCR. Disconnect the power
cord, then reconnect it. Clean the
Disc, then turn on the DVD/VCR
again and reinsert the Disc for
playback.

• If a Disc has multiple layers, the

picture may freeze occasionally.This
happens when the first layer
switches to the second layer.This is
not a malfunction.

• When the DVD or CD light

appears on the display panel, the
Disc is loaded and ready for
playback.

• When you press OPEN/CLOSE A

or PLAY (DVD) on the front of the
DVD/VCR when the power is off,
the DVD/VCR will turn on in DVD
mode. Otherwise, the DVD/VCR
will turn on in the mode in which it
was turned off.

• If you use PLAY B to close the

Disc tray, playback starts
automatically. If you use
OPEN/CLOSE A to close the Disc
tray, you have to press PLAY B to
start playback.

Helpful Hints

Before you begin, turn on the TV, Stereo, and other equipment
connected to the DVD/VCR. Make sure the TV and the Stereo (if
applicable) are set to the correct channel.
Details are on pages 8-14.

1

Press STANDBY-ON y

y

to turn on the DVD/VCR.

2

Press DVD so DVD light appears on the front of the
DVD/VCR.

3

Press OPEN/CLOSE

A

on the DVD/VCR to open

the Disc tray.

4

Place a Disc into the tray. If the DVD is recorded on
only one side, place the Disc in the tray with the label
facing up and the shiny side facing down. Some DVDs are
recorded on both sides. Make sure the label of the side you
want to play is facing up.

5

Press PLAY B to close the tray. The tray will close and
playback will begin. If playback does not start automatically,
press PLAY B again.
If a DVD menu appears instead, see page

35.

To play MP3,Windows Media

TM

Audio or JPEG Files, see

page 46-47.
You also can close the tray by pressing
OPEN/CLOSE A.

6

Press STOP C to stop playback.

Insert a Disc.

4

Remember, this DVD/VCR

will play only certain Discs.

See page 7 for details.

Press OPEN/CLOSE A
on the DVD/VCR.

3

STANDBY-ON

PLAY

DVD

VCR

VCR/TV

OK

MENU

MENU

DISC/VCR

RETURN

TITLE

A-B

CLEAR/RESET SLOW

SUBTITLE

ZOOM

ANGLE

REPEAT

REPEAT

AUDIO

SEARCH

MODE

DISPLAY

SKIP / CH

SYSTEM

PAUSE

STOP

1

2

6

5

H9820UD_IB_EN_1_0210 2/14/05 11:16 AM Page 18

Advertising