Proview XAP series - Manual (Page 22)

OSD Menu
ENGLISH
21 Xerox© LCD Monitor User’s Manual
To create the best picture, your XAP series has been preset at
the factory with the Preset Mode Timing shown on page 25.
The OSD (On Screen Display) Menu allows the user to adjust
various settings and options by following the steps below.
1
Press the MENU button to display the OSD. The OSD main
menu provides an overview of the selection of controls
available.
2
Press the UP or DOWN button to highlight the desired icon.
Then, press the MENU button to activate the highlighted
icon
3
Press the UP or DOWN button to change the value of the
selected item.
4
Select the EXIT icon to exit the OSD.
5
Repeat steps 1 through 4 to make further adjustments. All
changes are stored immediately.
BRIGHTNESS
Using the OSD Menu
3 OSD Menu