Pioneer KEH-P4025 - Manual (Page 17)

Initial Settings
En 16
Adjusting initial settings
Initial settings lets you perform initial set up of
different settings for this unit.
1 Press SOURCE and hold until the unit turns
off.
2 Press AUDIO and hold until TIME appears
in the display.
Press
AUDIO repeatedly to switch between the
following settings:
TIME — FM STEP — AM STEP — AUX
Use the following instructions to operate each
particular setting.
• To cancel initial settings, press
BAND .
• You can also cancel initial settings by holding
down
AUDIO until the unit turns off.
Setting the time
This is used to set the time on the unit’s clock
display.
1 Press AUDIO to select the time.
Press AUDIO until the time appears in the dis-
play.
2 Select the portion of the time display you
wish to set with
2/3.
Pressing
2/3 will select a portion of the clock
display:
HOUR — MINUTE
As you select portions of the clock display the
portion selected will blink.
3 Select the correct time with
5/∞.
Pressing
5 will increase the selected hour or
minute. Pressing
∞ will decrease the selected
hour or minute.
Setting the FM tuning step
The tuning step employed by Seek Tuning in the
FM mode can be switched between 100 kHz
(preset at the factory) and 50 kHz.
1 Press AUDIO to select FM STEP .
Press AUDIO repeatedly until FM 100 appears in
the display.
2 Select the FM tuning step with
2/3.
English
Español
Deutsch
F
rançais
Italiano
Nederlands