Waveform display symbols (track, Hot cue tags)’ p.59 – Pioneer SVJ-DL01 User Manual
Page 59
DJS Ver. 1.600
59
4
Useful Functions
Setting up to 4 Points to Start Playing (Track Hot Cue)
Deleting Track Hot Cues
Display of Cues and Loops
Waveform Display Symbols (Track Hot Cue Tags)
When you set a Track Hot Cue, a Track Hot Cue tag is displayed
in the waveform display.
Fine Tuning the Stop Position
1. Display a [Cue Mark] in either the track list or the play list.
2. Right click above the [Cue Mark] and click [Clear Track
Hot CUE].
[●] (Filled in):
A cue point has been set.
[〇] (Only the outer ring is colored):
A loop has been set.
1. Indicates the cue point for Track Hot CUE 1.
2. Indicates the loop in point for Track Hot CUE 2.
3. Indicates the loop out point for Track Hot CUE 2.
2 1 3
Copying Information of a
[Track Hot CUE] button to a
List Hot Cue
‘3-4-1 Determining List Hot Cue
1. Play a song and pause it approximately where sound
starts to play.
2. Use the [8] / [9] buttons or the jog dial to fine tune the
position. You can make adjustments in increments of 1
frame (1/75 of a second).