2back view and ports – Pioneer Tray-Load Drive DVR-A05 User Manual
Page 10
DVR-A05/ DVR-105 Operating Instructions
- 7 -
4.2
Back View and Ports
DVR-A05/105 Back View
8) Audio Output
connector for analog audio output, uses a Modex 70553 connector
Select the appropriate cable from the following chart:
Pin Name
Function
1
L
Left channel audio output
2 G
Ground
3 G
Ground
4
R
Right channel audio output
9) Device Configuration Jumper
Turn OFF the unit then set this jumper switch to select the drive use mode
supporting the computer (jumpered = ON; no jumper = OFF)
Pin Name
Function
1
MA*
on Drive set to Master mode
2
SL
on Drive set to Slave mode
3
CS
on Drive set to Cable Select mode
4
Reserved
5
Reserved
* Pin #1 is active when shipped from the factory.
10) Host IDE Interface
40-pin I/O connector in accordance with ATA specifications
11) DC Input
power supply input for DC +5 V and +12 V
Pin Name
Function
1
+12
Power supply input for DC +12 V
2 G
Ground
3 G
Ground
4
+5
Power supply input for DC +5 V