Panasonic AW-PH400P - Manual (Page 35)

Pan/Tilt Control Panel AW-RP400
AW-RP400
35
How to replace the zoom switch
1 Remove the four screws that secure the zoom lever.
2 Pull out the zoom lever, disconnect the two cables from
the circuit board inside, and remove the zoom lever.
3 Plug the two cables extending from the zoom switch into
the connectors on the circuit board inside.
4 Secure the zoom switch using the four screws.
Screws ! 4
Screws ! 4
❈ Before replacing the zoom switch, turn off the power.